- Home >
- Water Safety & Flow Control >
- Control Valves >
- Mustang Control Valves >
- M116 Series Pressure Relief, Sustaining or Backpressure Control Valves > LFM116-5, LFM1116-5
Pressure Sustaining with Hydraulic Check Feature
Lead Free* Models Available
1-1/4 to 16 inch
The WATTS ACV Backpressure or Sustaining Control Valve with Hydraulic Check Feature is designed to permit flow when upstream pressure is above the adjustable setpoint of the control pilot, and throttle toward closed when upstream pressure falls below the adjustable setpoint. The valve will also close drip-tight when downstream pressure becomes greater than upstream pressure.
When the valve is installed "in line" on the discharge of a pump, it acts as Backpressure Control Valve. When pump discharge pressure falls below the pilot setting, the valve modulates toward a closed position, increasing backpressure against the pump.
When the valve is installed "in line" connecting two distribution zones, the valve acts as a Pressure Sustaining Control Valve. When pressure in the upstream zone falls below the pilot setting, the valve modulates toward a closed position, sustaining pressure in the upstream zone.
To preview and download BIM Drawings for this product, please select a model/size from the list.
Disclaimer: Watts product dimensions in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold.
Please Note: Watts literature requires Adobe Acrobat Reader to view.
*The wetted surface of this product contacted by consumable water contains less than 0.25% of lead by weight.