Lead Free* Models Available
3 to 10 in. (80 to 250mm)
Series WVS Valve Setters are designed to augment the installation of the "N" series backflow prevention valves. They are available in three connection options: Flange x Flange, Mechanical Joint x Flange and Mechanical Joint x Mechanical Joint. Series WVS is constructed of fusion epoxy coated ductile iron. Integral ductile iron support between elbows transfers thrust downstream, thus eliminating thrust block requirements between elbows. Mechanical joint restraint devices may be used at the pipe connections, depending on local conditions.
To preview and download BIM Drawings for this product, please select a model/size from the list.
Disclaimer: Watts product dimensions in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold.
Please Note: Watts literature requires Adobe Acrobat Reader to view.
*The wetted surface of this product contacted by consumable water contains less than 0.25% of lead by weight.